Posts Tagged ‘Reactor

10
Apr
13

Mueller 15-gallon insulated and jacketed reactor

SPI-6000-SPIbg

Mueller Co 15 gallon insulated and jacketed reactor. Reactor interior has 4 baffles and is all constructed of stainless steel. The internal pressure rating for the vessel is 25 psi & full vacuum @ 340° F. The jacket is rated for 100 psi @ 340° F. National Board # 4438. The reactor has caster. This unit has a .5 hp 1725 rpm Lightnin agitator that is tagged for hazardous locations with (2) 4 blade propellers. The top has (4) .5″ diameter NPT inlets and (2) 1.5″ NPT outlets. The side has a 2″ NPT for insulation, a (2) .75″ NPT jacket in/outlets. The bottom has a .75″ NPT, a .5″ NPT, and a 1″ NPT center discharge reduced to .5″ NPT that is 6″ from the ground. Overall dimensions are 42″ wide x 42″ long x 80″ tall. Serial number 140409-1. Requires 115/230 vac 1 phase electrical supply.

http://www.specialprojects.com/equipment/6000/

Advertisements
20
Jan
12

Precision Stainless Inc. 75 gallon jacketed reactor

75 gallon jacketed reactor

75 gallon jacketed reactor

Precision Stainless Inc. 75 gallon jacketed reactor. The reactor interior, exterior, legs and base are constructed of 316L stainless steel. The internal pressure ratings for the vessel are 15 psi for temperatures of -20° F to -150° F and 50 psi for temperatures of -20° F to +450° F. The vessel is also rated for full vacuum. The interior has (4) 4″ wide baffles that run the length of the straight side. The jacket is rated for 100 psi for temperatures of -150° F to +450° F. The reactor has a diameter of 26″ and a 33″ straight side height with 6″ dish bottom and 6″ dome top. The top is flanged and bolt to the body of vessel for access. The top has (1) 4″ sight glass, (2) 2″ flanged fittings, (2) 1″ npt fittings and (5) 3/4″ npt fittings. The two side jacketed zones for supplied by (4) 1″ npt fittings. The bottom has a 3″ flanged fitting with a Janesbury pneumatically operated ball valve. The reactor is equipped with a 1.17 hp lightnin agitator. The agitator has a 1.5″ diameter shaft with a 16″ 3 blade prop. The agitator has an on/off switch with portable extension cord. The motor and switch housing are both tagged for hazardous locations. The entire unit is mounted on a 4′ x 4′ stainless steel skid. Serial # 8818-10. National Board # 1985. Overall dimensions are 48″ wide x 48″ long x 78″ tall. Requires 230/460 vac 3 phase electrical supply. Excellent condition.

http://www.specialprojects.com/




Special Projects International

Special Projects International

SPI’s Blog



With this blog Special Projects is setting out to keep you better informed about the equipment that is weekly being added to our inventory. Thanks for stopping in!


Special Projects Twitter

Hours & Info

1-502-778-3883
M-Fri 8am - 5pm
Advertisements

%d bloggers like this: